- Australian Business Owned and Operated - Free Call - 1300 653 052
Special Order Item - Lead time of 3 weeks from order
Magewell Pro Convert HDMI 4K Plus is a super compact device that will convert your HDMI video signal to the NDI protocol allowing reliability and versatility in your live streaming workflow for your HDMI devices.
The Magewell Pro Convert HDMI 4K Plus adopts NewTek’s royalty-free NDI® protocol for encoding and transmission, the Pro Convert family easily and reliably converts HDMI video signals into NDI streams.
These NDI streams will be available to all NDI-compatible software and systems on the same network regardless of physical distance, ensuring high-quality, low-latency, IP-based live production experiences superior to traditional live production solutions.
Pro Convert devices automatically detect your network and the video input signal format, with no manual network configuration nor source format selection needed. Plug in the cables, and it just works!
Pro Convert HDMI 4K Plus features a small size of 117.5mm x 66.7mm (4.63” by 2.63”) and 23.4mm (0.92”) thickness, weighing only 234g. Tiny as it is, the converter supports HDMI 2.0 signal inputs up to 4K at 60fps 4:4:4 and can encode NDI streams up to 4Kp60 4:2:2.
Find out further info over at Magewell's website.
| Supported Web Browsers | Microsoft Internet Explorer 11 |
|---|---|
| Microsoft Edge | |
| Mozilla Firefox version 61 and above | |
| Google Chrome version 49 and above | |
| Apple Safari 11.1 and above | |
| Opera 55.0.2994.44 and above | |
| Supported Software | OBS |
| XSplit | |
| vMix | |
| VidBlasterX | |
| Wirecast | |
| streamstar SW | |
| mimoLive | |
| Any other NewTek NDI-enabled encoding or streaming software | |
| Input Interfaces | HDMI 1.4 |
| HDMI 2.0 | |
| DVI-D 1.0 | |
| Loop-through Interface | HDMI 1.4 |
| HDMI 2.0 | |
| DVI-D 1.0 | |
| Output Interface | SD Card (functions to be developed) |
| PTZ Control | Mini-DIN–8 jack |
| Network Interfaces | 10/100/1000Mbps Ethernet |
| IEEE 802.3af PoE | |
| USB Interface | USB2.0 Type B |
| 5V/2.1A power supply | |
| USB RNDIS | |
| Input feature | Support for input video resolutions up to 4:4:4 8-bit 4096x2160 60fps |
| HDMI Specific Features | 600MHz HDMI receiver |
| Adaptive HDMI equalizer | |
| Support for customized EDID | |
| Support for extraction of AVI/Audio InfoFrames | |
| Full colorimetry support | |
| Support for up to 4096x2160 4:4:4 60fps input signals | |
| Support for 8 channel IEC60958 audio streams | |
| Support for extraction of audio formation information & channel status data | |
| Support for extraction of video timing information | |
| Support for extraction of 3D format information | |
| Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode. | |
| NDI® Output Format | Support for 4:2:2 8-bit output |
| Support for up to 4096x2160 60fps or 1920x1080 240fps | |
| Support for NDI 3.5 | |
| Video Processing Features | Video processing pipelines with 4096x2160 60fps |
| Video brightness, contrast, saturation, hue adjustment | |
| Video de-interlacing | |
| Video aspect ratio conversion (Auto or manual selection of output aspect ratio) | |
| Video frame rate conversion | |
| Video mirror fl | |
| Video color format conversion | Auto or manual selection of input color format & quantization range |
| Auto or manual selection of output color format, quantization range & saturation range | |
| Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats | |
| Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats | |
| Support for Limited or Full quantization range | |
| Support for Limited, Full & ‘Extended gamut’ saturation range | |
| NDI® Source Name | Support for setting the device name shown in the system using Web UI. By default, the device name is ‘Pro Convert HDMI 4K+’. |
| Support for setting the source name shown in the system using Web UI. By default, the source name is ‘board-index + serial number’. | |
| Support for setting board-index, from 0 to F, through on-board rotary switch | |
| Firmware Upgrade | Support for manual update using Web UI |
| LED Indicator | The state of power supply: on/off |
| Tally: preview/program | |
| The state of input signal: locked/unlocked | |
| The state of loopthrough signal: loopthrough connected and signal detected/undetected | |
| Form Factor | 117.5mm (L) x 66.7mm (W) x 23.4mm (H) |
| Accessories | USB2.0 A to B Cable |
| 5V/2.1A power adaptor | |
| Power Consumption | 5V max current: ~2A |
| Max power consumption: ~10W | |
| Working Environment | Operating temperature: 0 to 45 deg C |
| Storage temperature: –20 to 70 deg C | |
| Relative Humidity: 5% to 90% non-condensing |
